- 1 What is Airport Layout?
- 2 What is a VFR checkpoint?
- 3 What is VOR in aviation?
- 4 What are the basic VFR minimums?
- 5 What are the VFR minimums?
- 6 Why are airports so clean?
- 7 What does L and R mean on runways?
- 8 What are the two types of airports?
- 9 Can you fly in Class E airspace?
- 10 How high can I fly VFR?
- 11 Can you fly over C airspace?
What is Airport Layout?
An Airport Layout Plan (ALP) is a scaled, graphical presentation of the existing and future airport facilities, their location on the airport campus, and pertinent clearance and dimensional information.
What is a VFR checkpoint?
Some points on sectional maps are flagged as ” VFR Checkpoints.” They are identified with a flag icon, along with the name of the checkpoint underlined. These checkpoints are prominent buildings or landmarks that can be visually easy to identify from the air.
What is VOR in aviation?
Description. The Very High Frequency Omni-Directional Range ( VOR ) is a ground-based electronic system that provides azimuth information for high and low altitude routes and airport approaches.
What are the basic VFR minimums?
Below 10,000 feet mean sea level, basic VFR visibility is three statute miles. But if you’re flying above 10,000 feet msl, you need five (not three) statute miles visibility to be able to fly VFR.
What are the VFR minimums?
14 CFR § 91.155 – Basic VFR weather minimums.
|Airspace||Flight visibility||Distance from clouds|
|Less than 10,000 feet MSL||3 statute miles||500 feet below.|
|1,000 feet above.|
|2,000 feet horizontal.|
|At or above 10,000 feet MSL||5 statute miles||1,000 feet below.|
Why are airports so clean?
The high amount of traffic in airports and other public transportation buildings and complexes creates some unique cleaning challenges. Daily floor and restroom maintenance of airports, bus stations, and the like call for techniques and equipment that clean larger areas in shorter amounts of time.
What does L and R mean on runways?
The ” L ” and ” R ” designate the relative position (left or right) of each runway respectively when approaching/facing its direction. A small number of airports have three parallel runways —the runway in the middle gets a “C” for center.
What are the two types of airports?
There are two types of airports —towered and nontowered. These types can be further subdivided to: Civil Airports — airports that are open to the general public.
Can you fly in Class E airspace?
Can I fly there? Can I use LAANC there?” The short answer to this question is that yes, you may be able to operate near a small airport in this situation if you are in uncontrolled airspace, you follow safety guidelines for operating near an airport (see 5.8. 1), and you launch and land from a legal spot.
How high can I fly VFR?
An aircraft must maintain an altitude of 500 feet above the surface, except over open water or sparsely populated areas. In those cases, the aircraft may not be operated closer than 500 feet to any person, vessel, vehicle, or structure.
Can you fly over C airspace?
While you don’t need an operable transponder to fly below a Class C shelf, you will need one to fly above Class C airspace. As you approach a Class C airport, you’ll contact that airspace’s approach control. Call ATC on the radio before you’re in Class C airspace and make sure to tell them: Current transponder code.