- 1 What is pre-flight?
- 2 What are pre-flight services?
- 3 Why is a preflight check important?
- 4 What is an aircraft pre-flight inspection?
- 5 What is a pilot’s checklist called?
- 6 What is an aircraft checklist?
- 7 How would you perform a preflight check?
- 8 Why do pilots use checklists?
- 9 Can an airplane fly with one engine?
- 10 What flight instruments need to be set before takeoff on every flight?
- 11 What is a 100 hour aircraft inspection?
- 12 What is an aircraft cycle?
What is pre-flight?
(Entry 1 of 3): preparing for or preliminary to flight (as of an aircraft) a preflight inspection. preflight.
What are pre-flight services?
These ‘ pre – flight services ‘ include a set of personal activities that is an integral part of the total journey and include facilities for passengers to rest and relax, to be entertained, to catch up with work, and personal care (de Jager and Dahari,2012).
Why is a preflight check important?
The Preflight Check Before each and every flight, one of the pilots will conduct a preflight check to evaluate whether the aircraft is airworthy and fit to fly. This is done before every flight.
What is an aircraft pre-flight inspection?
Preflight Assessment of the Aircraft The inspection has two parts and involves the pilot inspecting the airplane’s airworthiness status and a visual preflight inspection of the airplane following the AFM/POH to determine the required items for inspection.
What is a pilot’s checklist called?
In aviation, a preflight checklist is a list of tasks that should be performed by pilots and aircrew prior to takeoff. Its purpose is to improve flight safety by ensuring that no important tasks are forgotten.
What is an aircraft checklist?
” Checklists ” (whether challenge-and-response or read-and-do, whether paper or electronic) constitute tools that support flight crew airmanship and memory and ensure that all required actions are performed without omission and in an orderly manner.
How would you perform a preflight check?
If in doubt, do not fly!
- Inspect the empennage.
- Remove tail tie-down.
- Check for free movement and security of elevator and rudder.
- Check antennae.
- Inspect right flap.
Why do pilots use checklists?
Pilots use aircraft checklists to prevent complacency by following every step to ensure aircraft are correctly configured for every phase of flight. Missed steps & incorrectly remembered steps have contributed to many aircraft accidents. Checklist use is mandatory by most large aircraft companies.
Can an airplane fly with one engine?
Can a passenger jet fly with only one engine? Yes it can. A twin- engine aircraft can fly perfectly well on only one engine. In fact, it can even continue the take-off and then safely land with just one engine.
What flight instruments need to be set before takeoff on every flight?
Before takeoff checklist
- Altimeter – set.
- Auxiliary fuel pump – off.
- Directional gyro – set.
- Engine idle – checked.
- Flaps – as required.
- Flight controls – free and correct.
- Fuel gauges – checked.
- Instruments and radios – checked and set.
What is a 100 hour aircraft inspection?
A 100 hour inspection is a type of maintenance assessment for commercial aircrafts under 12,500 pounds. This is performed after every 100 hours of flight time by an FAA (Federal Aviation Administration) certified A&P (Airframe and/or Powerplant) mechanic or by the aircraft manufacturer.
What is an aircraft cycle?
Flight Cycle means the operation of an Engine from the time an Aircraft leaves the ground until it touches the ground at the end of a flight. For the purposes of this Agreement, an aborted take-off or a touch and go landing shall also be considered as a Flight Cycle.