Often asked: What Does Pda Stand For In Aviation?

What does an stand for aviation?

A/A – Air to Air. AA – Anti Aircraft. AA – American Airlines. AAIB – Air Accident Investigation Branch. AAL – Above Aerodrome Level.

What does G stand for in aviation?

G -Force. Acceleration in Aviation: G -Force.

What does TTS mean in aviation?

TTS Aviation Abbreviation

1 TTS Time To Station Avionics, Engineering, Technology
1 TTS Torpedo Training Squadron Military, Air Force, Armed Forces
1 TTS Total Technical Support Technology, Lufthansa, Aircraft
1 TTS Trails Transport Service Technology, Aircraft, Airway
1 TTS Trim Tank System Technology, Aircraft, Airway

What does NPT stand for in aviation?

The most common American styles are National Pipe Taper ( NPT ) and National Pipe Taper Fuel (NPTF). NPT threads are used in mechanical or low-pressure air or fluid applications and the use of sealant or tape is adequate to prevent leakage.

What is MP in aviation?

MP. Mental Picture. Technology, Aircraft, Airway. Technology, Aircraft, Airway.

What is CTC in aviation?

CTC. Cabin Temperature Controller. Engineering, Technology, Aircraft.

What is a 9 g turn?

A 9 g turn is one where you feel like gravity is 9 times higher than normal.

You might be interested:  Readers ask: What Company Do Aviation Technician Work For?

Why do pilots say heavier?

When a pilot uses the phrase “ heavy,” he is reminding ATC that his aircraft is large and requires more separation between it and the aircraft following.

What is G limit?

What is G limit and why is it important in jet fighters? With in the envelope, say one where speed and load factor ( g’s ) are expressed on a plot, you’re ok if you remain within the boundary. Once you cross the boundary, the aircraft may stall, of fail to continue to perform adequately in some other manner.

What is Tx in aviation?

TX. Indicator for Maximum Temperature. Technology, Aircraft, Airway.

What is FR 01?

Acronym. Definition. GMDSS. Global Maritime Distress & Safety System.

What is Alt * in aviation?

In most autopilots there is an altitude capture mode. In Airbus aircraft this is known as ALT *, or “ Alt Star.” The computer uses the selected altitude and the vertical speed to calculate how far ahead to begin the capture maneuver, which is an asymptotic curve.

What does NPT mean in text?

The word npt is used in Texting, is a general term meaning input,not.

What NPT means?

The best known and most widely used connection where the pipe thread provides both the mechanical joint and the hydraulic seal is the American National Pipe Tapered Thread, or NPT. NPT has a tapered male and female thread which seals with Teflon tape or jointing compound.

What does N stand for in aviation?

Where do N -numbers come from? The U.S. received the ” N ” as its nationality designator under the International Air Navigation Convention, held in 1919. The Convention prescribed an aircraft -marking scheme of a single letter indicating nationality followed by a hyphen and four identity letters (for example, G-REMS).

Leave a Reply